Antminer D3 17 GH

Antminer D3 17 GH

Marka: Bitmain

Bitmain Antminer D3 17 GH

  • $300.00


    Stok Durumu: Stokta Var!

    Teslimat Zamanı: Sevk tarihinden 7-10 gün içerisinde

1. Specifications and other information of the Antminer D3 are as mentioned below.

2. Please select the correct address for shipping before you submit your order because, for this batch, the shipping address cannot be changed after the order has been submitted.

3.The shipping for this batch will be arranged within 10 working days after Bitmain has received full payment. We advise you to research and prepare in advance for customs' clearance in your country to avoid delays or unexpected costs.

4. You will need an ATX PSU with at least 10 six-pin PCIe connectors. There are 3 six-pin PCIe connectors on each hashing board and all three need to be connected to the PSU for the hashing board to operate. Do not connect more than one PSU to the same hashing board. Bitmain recommends the APW3++ to power the D3.

5. Separate power supply to control board: there is one additional six-pin PCIe connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 10 PCIe connectors are connected to a power supply.



Parameters of ANTMINER D3
NO.  Parameters                                          Value
1. Product model                                        D3
2. Total quantity of hash chips                 180 chips
3. Total quantity of hash boards              3 boards per miner
4. Total hash rate                                       17GH/s±5%
5. DC voltage input                                    11.60~13.00 V
6. DC current input @12V DC input        75.2A +5%
7. DC Power @12V DC input                    902W +7% 
8. 220VAC Power @25℃ ,93%                 970 W +7%
   conversion efficiency of APW3
9. 220VAC Power efficiency @25℃ ,         57mJ/MH+7%
   93% conversion efficiency of APW3
10. Weight(without package)                4.2 kg
11. Operation temperature                         0-40 ℃
12. Storage temperature                           -40-85 ℃
13. Operation humidity                         5%RH-95%RH, prevent condensation
14. Noise                                                       76 dB
15. Networking connection mode               Ethernet Cable 
                                                            All three PCI-E ports are required to 
                                                            power the board. You can use one PSU 
                                                            to power multiple boards, but do not 
16. Power connection mode           attempt to power one board with twoPSUs. 
                                                            We suggest to prevent the control board 
                                                            to be powered up before hash boards be 
                                                            powered up.
17. Size (Length*Width*Hight)           320mm*130mm*190mm

"Balkanlar, Türkiye, Orta Asya ve Orta Doğu’da; küresel Kripto Madencilik Hizmeti Veriyoruz, çok uluslu ve bölgesel şirketlerin öncelikli çözüm ortağıyız."

Elektronik Bülten


Bize Ulaşın